02 / Product Families
We describe materials by what they do and how they are built, because that is how they should be selected. Tell us the job and we will map it to a construction — including the premium international grade, where that is genuinely the right answer.
Beyond our own-qualified constructions, DINGGU also supplies and precision-converts materials from leading international tape manufacturers — including 3M, tesa, Nitto and Rogers — to your specified part number, to your drawing, or qualified as an equivalent. Our die-cutting and converting processes are applied to customer-specified materials from these and other brands on the same engineering basis as our own range.
Brand names are trademarks of their respective owners. References here are for material identification only and do not imply any affiliation, authorisation, agency or endorsement by any brand owner. See the trademark notice in the footer.
Tissue, PET, PE and film-carrier constructions with acrylic, rubber or modified-acrylic adhesive systems. The everyday workhorse for nameplates, trim, gaskets and component fixing.
Viscoelastic acrylic foam cores that replace screws, rivets and welds. Distributes stress across the joint, absorbs differential thermal expansion, and seals in the same operation.
Thermally conductive adhesive tapes, gap fillers, graphite heat-spreading sheets and thermal pads for moving heat out of dense, sealed assemblies without adding fasteners.
Copper and aluminium foil tapes with conductive or non-conductive adhesive, plus conductive fabric-over-foam, for grounding, shielding continuity and static dissipation.
Polyimide, polyester, PTFE glass cloth and aramid paper tapes for solder masking, slot liners, hairpin winding insulation and elevated-temperature class duty.
Microcellular polyurethane, silicone, EPDM, EVA and polyethylene foams in open- and closed-cell forms — die-cut into cushioning pads, dust seals, compression gaskets and NVH parts.
PE, PET and paper protective films from low to medium tack, for coating, forming, machining and transit protection — engineered to remove cleanly without residue or ghosting.
Optically clear adhesives, light-shielding and black-white double-coated tapes, diffuser and reflector films for backlight units, bezels and display module assembly.
Adhesive systems engineered for low-surface-energy plastics, powder-coated, textured and lightly oiled surfaces — plus removable, repositionable and high-shear constructions.
3M industrial and specialty tapes supplied and converted to your part number. From VHB structural tapes to electrical, masking and thermal management grades, processed with the same tooling and quality controls as our own-qualified constructions.
tesa adhesive tapes for automotive, electronics and industrial assembly. Supplied to your specified tesa part number and die-cut or converted into pads, strips, liners and custom shapes to your drawing.
Rogers BISCO silicone foams and PORON microcellular urethanes for gasketing, sealing, cushioning and compression-set resistance. Converted from your specified Rogers grade to tight-tolerance parts.
Material families are described generically by construction and function. Where your drawing already specifies a particular international grade, send us the part number and we will quote both that grade and a qualified alternative side by side.