01Our Role02Products
Double-Sided Bonding TapesAcrylic Foam Structural TapesThermal Interface MaterialsEMI / RFI ShieldingInsulation & High-Temperature FilmsDouble-Sided & Foam TapesSurface Protection & MaskingOptical & Display MaterialsSpecialty & Difficult Substrates3M Industrial & Specialty Tapestesa Adhesive TapesRogers BISCO & PORON Foams
03Die-Cutting
Rotary Die-CuttingFlatbed / Steel-RuleLaser Die-CuttingCNC Digital KnifeMulti-Layer Composite
04Converting
Precision SlittingRewinding & RespoolingLamination & CompositingSheeting & Cut-to-LengthLogo, Print & Private Label
05Industries
Consumer ElectronicsNew Energy & EV BatteryAutomotive Interior & ExteriorHome AppliancesDisplay & OpticalMedical & WearablesIndustrial & MachineryRenewable EnergySignage, Print & GraphicsRail & Transport
06Strength
Testing LaboratoryCertifications
07Our Story
MilestonesOur Principles
08FAQ
Ordering & MOQQuality & Testing
09Contact
Request a QuoteFind a Representative
Get a Quote

3M SJ3460 Dual Lock Reclosable Fastener

3M SJ3460 Dual Lock Reclosable Fastener — supplied to your specified 3M part number and converted into pads, strips and custom shapes. Each lot is traceable and conversion-ready on our qualified lines.

  • Dual Lock Reclosable Fastener
  • Supplied to 3M part No. SJ3460
  • Die-cut, slit or laminated to drawing
  • Lot-traceable, QC matched to spec
engagedSJ3460RECLOSABLE FASTENERDINGGU schematic illustration
Original DINGGU schematic illustration of a Dual Lock reclosable fastener — representative of the construction, not manufacturer photography.

At a glance

Brand
3M
Grade
SJ3460
Family
Dual Lock reclosable fastener
Nominal build
2.5 – 5.7 mm engaged
Our role
Supply & precision conversion
Request a quote for 3M SJ3460

Product overview

3M SJ3460 is a reclosable mushroom-head fastener. Two identical strips are pressed together and the moulded stems interlock with an audible snap, giving a strong but openable joint. Unlike hook-and-loop it is self-mating, so one part number serves both halves of the closure and the engagement resists shear and tension rather than relying on fibre loops.

DINGGU Tape supplies this grade as original manufacturer material and converts it on our own slitting, die-cutting and lamination lines. You can order it in roll form, or as finished parts made to your drawing — pads, strips, gaskets and multi-layer builds — with lot-level traceability on every delivery.

Construction and materials

Release linerAcrylic adhesivePolyolefin backingMoulded mushroom-head stems2.5 – 5.7 mm engagedCONSTRUCTION — SJ3460Layer order shown to scale of nominal build. Original DINGGU schematic — not a manufacturer drawing.
Layer sequence of the Dual Lock reclosable fastener construction. Drawn by DINGGU Tape for engineering orientation.

Technical data

The values below are typical reference ranges for the Dual Lock reclosable fastener family, provided to help you shortlist a construction. They are not reproduced from a manufacturer datasheet and are not a specification. Before release to production, confirm the figures for 3M SJ3460 against the current technical datasheet issued by 3M.

3M SJ3460 — typical family reference data
ConstructionMoulded polyolefin mushroom-head stems on a backing, adhesive-coated reverse
Mating principleSelf-mating — identical strips interlock with each other
Stem density170 / 250 / 400 stems per in² depending on grade
Adhesive systemPressure-sensitive acrylic on the mounting face
Colour familyBlack · clear (grade-dependent)
Engaged thickness2.5 – 5.7 mm depending on grade
Service temperature−30 °C … +90 °C continuous (typical)
ReclosabilityRepeated open/close cycles — cycle life is grade-dependent
Engagement feelHigher stem count gives higher strength and firmer closure
Substrate suitabilityPainted metal, glass, rigid plastics; primer advised on LSE plastics

Typical applications

  • Removable access and service panels on equipment enclosures
  • Point-of-purchase display assembly and re-merchandising
  • Signage and interior trim that must be demountable without tools
  • Cable trunking and battery cover retention
  • Fixture mounting where inspection access is needed later

Application guidance

  • Bond to a clean, dry surface and allow adhesive dwell before first engagement
  • Support the panel during the first closure — snap-in force is deliberately high
  • Mix stem densities to tune opening force on large panels
  • Leave a small pull tab or finger relief at one edge for opening
  • Avoid engaging strips at an angle; align, then press flat along the length

Supply and conversion

How we supply 3M SJ3460
Supplied asOriginal manufacturer material, converted to your drawing or sample
Conversion formatsSlit rolls, cut lengths, die-cut pads and mating pairs
Processes in housePrecision slitting, rotary and flatbed die-cutting, laser cutting, lamination
Dimensional toleranceTypically ±0.15 mm on die-cut parts and ±0.5 mm on slit width, part-dependent
Multi-layer buildsLaminated stacks combining foam, film, liner and secondary adhesives
Liner engineeringSplit liners, extended tabs, kiss-cut liners and custom release weights
Lot controlLot-level traceability from incoming reel to finished part
InspectionFirst-article inspection and dimensional report available on request
Minimum orderSample and pilot quantities accepted for qualification builds
DocumentationManufacturer datasheet and, where issued, RoHS / REACH statements forwarded with delivery

Important notice

Trademarks. 3M™ and VHB™ are trademarks of 3M Company. DINGGU Tape is an independent converter and supply partner. We are not affiliated with, authorised, sponsored or endorsed by this manufacturer, and grade references are used solely to identify the material a customer has specified.

Illustrations. All drawings on this page are original schematic artwork produced by DINGGU Tape to show a generic construction. They are not manufacturer photography, not to scale, and do not depict the exact appearance of the finished product.

Technical values. Figures are indicative family-level ranges for orientation only and carry no warranty. The manufacturer’s current datasheet is the sole authority for 3M SJ3460. Suitability for a specific application must be validated by the user under real service conditions.