3M SJ3870 Dual Lock Reclosable Fastener
3M SJ3870 Dual Lock Reclosable Fastener — supplied to your specified 3M part number and converted into pads, strips and custom shapes. Each lot is traceable and conversion-ready on our qualified lines.
- Dual Lock Reclosable Fastener
- Supplied to 3M part No. SJ3870
- Die-cut, slit or laminated to drawing
- Lot-traceable, QC matched to spec
At a glance
- Brand
- 3M
- Grade
- SJ3870
- Family
- Dual Lock reclosable fastener
- Nominal build
- 2.5 – 5.7 mm engaged
- Our role
- Supply & precision conversion
Product overview
3M SJ3870 is a reclosable mushroom-head fastener. Two identical strips are pressed together and the moulded stems interlock with an audible snap, giving a strong but openable joint. Unlike hook-and-loop it is self-mating, so one part number serves both halves of the closure and the engagement resists shear and tension rather than relying on fibre loops.
DINGGU Tape supplies this grade as original manufacturer material and converts it on our own slitting, die-cutting and lamination lines. You can order it in roll form, or as finished parts made to your drawing — pads, strips, gaskets and multi-layer builds — with lot-level traceability on every delivery.
Construction and materials
Technical data
The values below are typical reference ranges for the Dual Lock reclosable fastener family, provided to help you shortlist a construction. They are not reproduced from a manufacturer datasheet and are not a specification. Before release to production, confirm the figures for 3M SJ3870 against the current technical datasheet issued by 3M.
| Construction | Moulded polyolefin mushroom-head stems on a backing, adhesive-coated reverse |
|---|---|
| Mating principle | Self-mating — identical strips interlock with each other |
| Stem density | 170 / 250 / 400 stems per in² depending on grade |
| Adhesive system | Pressure-sensitive acrylic on the mounting face |
| Colour family | Black · clear (grade-dependent) |
| Engaged thickness | 2.5 – 5.7 mm depending on grade |
| Service temperature | −30 °C … +90 °C continuous (typical) |
| Reclosability | Repeated open/close cycles — cycle life is grade-dependent |
| Engagement feel | Higher stem count gives higher strength and firmer closure |
| Substrate suitability | Painted metal, glass, rigid plastics; primer advised on LSE plastics |
Typical applications
- Removable access and service panels on equipment enclosures
- Point-of-purchase display assembly and re-merchandising
- Signage and interior trim that must be demountable without tools
- Cable trunking and battery cover retention
- Fixture mounting where inspection access is needed later
Application guidance
- Bond to a clean, dry surface and allow adhesive dwell before first engagement
- Support the panel during the first closure — snap-in force is deliberately high
- Mix stem densities to tune opening force on large panels
- Leave a small pull tab or finger relief at one edge for opening
- Avoid engaging strips at an angle; align, then press flat along the length
Supply and conversion
| Supplied as | Original manufacturer material, converted to your drawing or sample |
|---|---|
| Conversion formats | Slit rolls, cut lengths, die-cut pads and mating pairs |
| Processes in house | Precision slitting, rotary and flatbed die-cutting, laser cutting, lamination |
| Dimensional tolerance | Typically ±0.15 mm on die-cut parts and ±0.5 mm on slit width, part-dependent |
| Multi-layer builds | Laminated stacks combining foam, film, liner and secondary adhesives |
| Liner engineering | Split liners, extended tabs, kiss-cut liners and custom release weights |
| Lot control | Lot-level traceability from incoming reel to finished part |
| Inspection | First-article inspection and dimensional report available on request |
| Minimum order | Sample and pilot quantities accepted for qualification builds |
| Documentation | Manufacturer datasheet and, where issued, RoHS / REACH statements forwarded with delivery |
Important notice
Trademarks. 3M™ and VHB™ are trademarks of 3M Company. DINGGU Tape is an independent converter and supply partner. We are not affiliated with, authorised, sponsored or endorsed by this manufacturer, and grade references are used solely to identify the material a customer has specified.
Illustrations. All drawings on this page are original schematic artwork produced by DINGGU Tape to show a generic construction. They are not manufacturer photography, not to scale, and do not depict the exact appearance of the finished product.
Technical values. Figures are indicative family-level ranges for orientation only and carry no warranty. The manufacturer’s current datasheet is the sole authority for 3M SJ3870. Suitability for a specific application must be validated by the user under real service conditions.