3M 55260 PET Double-Sided Tape
3M 55260 PET Double-Sided Tape — supplied to your specified 3M part number and converted into pads, strips and custom shapes. Each lot is traceable and conversion-ready on our qualified lines.
- PET Double-Sided Tape
- Supplied to 3M part No. 55260
- Die-cut, slit or laminated to drawing
- Lot-traceable, QC matched to spec
At a glance
- Brand
- 3M
- Grade
- 55260
- Family
- PET double-sided tape
- Nominal build
- 0.05 – 0.20 mm
- Our role
- Supply & precision conversion
Product overview
3M 55260 is a thin double-sided tape on a polyester (PET) film carrier. The film gives high tensile strength, excellent dimensional stability and clean removal of small die-cut parts, which makes the construction well suited to precision electronics work and to bonds that see heat or solvent exposure.
DINGGU Tape supplies this grade as original manufacturer material and converts it on our own slitting, die-cutting and lamination lines. You can order it in roll form, or as finished parts made to your drawing — pads, strips, gaskets and multi-layer builds — with lot-level traceability on every delivery.
Construction and materials
Technical data
The values below are typical reference ranges for the PET double-sided tape family, provided to help you shortlist a construction. They are not reproduced from a manufacturer datasheet and are not a specification. Before release to production, confirm the figures for 3M 55260 against the current technical datasheet issued by 3M.
| Construction | PET film carrier coated both sides |
|---|---|
| Adhesive system | High-performance pressure-sensitive acrylic |
| Carrier | Polyester (PET) film — high tensile, dimensionally stable |
| Colour family | Clear · translucent · black (grade-dependent) |
| Thickness range | 0.05 – 0.20 mm across the family |
| Service temperature | −40 °C … +120 °C continuous (typical) |
| Short-term peak | up to +200 °C (typical, grade-dependent) |
| Substrate suitability | Metal, glass, PET/PC, FR4, coated surfaces, high-surface-energy plastics |
| Chemical resistance | Good resistance to moisture, humidity and many solvents |
| Precision converting | Very good — stable film supports tight-tolerance small parts |
Typical applications
- Membrane switch, touch panel and display bonding
- Flexible printed circuit and stiffener attachment
- Precision die-cut spacers, washers and shims
- Heat-exposed joints in lighting and power assemblies
- Rating plate and decorative trim mounting on metal
Application guidance
- Degrease and dry the substrates; avoid silicone-bearing release agents
- Apply firm, even pressure — thin films need pressure rather than time
- Where service temperature is high, allow a full 24 h dwell before heat exposure
- For fine parts specify a kiss-cut liner so parts stay in register
- Match liner release side to your pick-and-place or hand-apply sequence
Supply and conversion
| Supplied as | Original manufacturer material, converted to your drawing or sample |
|---|---|
| Conversion formats | Logs, slit rolls, die-cut pads and strips, kiss-cut sheets, tabbed and finger-lift parts |
| Processes in house | Precision slitting, rotary and flatbed die-cutting, laser cutting, lamination |
| Dimensional tolerance | Typically ±0.15 mm on die-cut parts and ±0.5 mm on slit width, part-dependent |
| Multi-layer builds | Laminated stacks combining foam, film, liner and secondary adhesives |
| Liner engineering | Split liners, extended tabs, kiss-cut liners and custom release weights |
| Lot control | Lot-level traceability from incoming reel to finished part |
| Inspection | First-article inspection and dimensional report available on request |
| Minimum order | Sample and pilot quantities accepted for qualification builds |
| Documentation | Manufacturer datasheet and, where issued, RoHS / REACH statements forwarded with delivery |
Important notice
Trademarks. 3M™ and VHB™ are trademarks of 3M Company. DINGGU Tape is an independent converter and supply partner. We are not affiliated with, authorised, sponsored or endorsed by this manufacturer, and grade references are used solely to identify the material a customer has specified.
Illustrations. All drawings on this page are original schematic artwork produced by DINGGU Tape to show a generic construction. They are not manufacturer photography, not to scale, and do not depict the exact appearance of the finished product.
Technical values. Figures are indicative family-level ranges for orientation only and carry no warranty. The manufacturer’s current datasheet is the sole authority for 3M 55260. Suitability for a specific application must be validated by the user under real service conditions.