3M 55237 Tissue Double-Sided Tape
3M 55237 Tissue Double-Sided Tape — supplied to your specified 3M part number and converted into pads, strips and custom shapes. Each lot is traceable and conversion-ready on our qualified lines.
- Tissue Double-Sided Tape
- Supplied to 3M part No. 55237
- Die-cut, slit or laminated to drawing
- Lot-traceable, QC matched to spec
At a glance
- Brand
- 3M
- Grade
- 55237
- Family
- tissue double-sided tape
- Nominal build
- 0.09 – 0.25 mm
- Our role
- Supply & precision conversion
Product overview
3M 55237 is a thin double-sided tape built on a tissue or non-woven carrier. The carrier keeps the adhesive film dimensionally stable so the tape can be die-cut into fine profiles and small parts without distortion, while remaining thin enough to be invisible in the finished assembly.
DINGGU Tape supplies this grade as original manufacturer material and converts it on our own slitting, die-cutting and lamination lines. You can order it in roll form, or as finished parts made to your drawing — pads, strips, gaskets and multi-layer builds — with lot-level traceability on every delivery.
Construction and materials
Technical data
The values below are typical reference ranges for the tissue double-sided tape family, provided to help you shortlist a construction. They are not reproduced from a manufacturer datasheet and are not a specification. Before release to production, confirm the figures for 3M 55237 against the current technical datasheet issued by 3M.
| Construction | Tissue / non-woven carrier coated both sides |
|---|---|
| Adhesive system | Pressure-sensitive acrylic (solvent or emulsion class) |
| Carrier | Tissue or non-woven — conformable and easy to die-cut |
| Colour family | White · translucent (grade-dependent) |
| Thickness range | 0.09 – 0.25 mm across the family |
| Service temperature | −20 °C … +120 °C continuous (typical) |
| Short-term peak | up to +150 °C (typical) |
| Substrate suitability | Paper, board, foam, felt, textile, painted metal, many plastics |
| Die-cutting behaviour | Excellent — carrier holds fine webs and small internal features |
| Adhesive symmetry | Balanced or differential coat weight available by grade |
Typical applications
- Nameplate, label and graphic-overlay mounting
- Foam, felt and gasket lamination before die-cutting
- Splicing and core-starting in converting and printing lines
- Fine die-cut parts for appliance and electronics assembly
- General interior assembly where a thin, invisible bond is required
Application guidance
- Bond to clean, dry, dust-free surfaces — wipe with IPA where practical
- Apply even pressure to wet the adhesive out onto both substrates
- Bond strength rises over the first 24 h as the adhesive flows
- For rough or open-cell foams choose a heavier coat weight
- Store rolls flat, in the original liner, away from direct sunlight
Supply and conversion
| Supplied as | Original manufacturer material, converted to your drawing or sample |
|---|---|
| Conversion formats | Logs, slit rolls, die-cut pads and strips, kiss-cut sheets, tabbed and finger-lift parts |
| Processes in house | Precision slitting, rotary and flatbed die-cutting, laser cutting, lamination |
| Dimensional tolerance | Typically ±0.15 mm on die-cut parts and ±0.5 mm on slit width, part-dependent |
| Multi-layer builds | Laminated stacks combining foam, film, liner and secondary adhesives |
| Liner engineering | Split liners, extended tabs, kiss-cut liners and custom release weights |
| Lot control | Lot-level traceability from incoming reel to finished part |
| Inspection | First-article inspection and dimensional report available on request |
| Minimum order | Sample and pilot quantities accepted for qualification builds |
| Documentation | Manufacturer datasheet and, where issued, RoHS / REACH statements forwarded with delivery |
Important notice
Trademarks. 3M™ and VHB™ are trademarks of 3M Company. DINGGU Tape is an independent converter and supply partner. We are not affiliated with, authorised, sponsored or endorsed by this manufacturer, and grade references are used solely to identify the material a customer has specified.
Illustrations. All drawings on this page are original schematic artwork produced by DINGGU Tape to show a generic construction. They are not manufacturer photography, not to scale, and do not depict the exact appearance of the finished product.
Technical values. Figures are indicative family-level ranges for orientation only and carry no warranty. The manufacturer’s current datasheet is the sole authority for 3M 55237. Suitability for a specific application must be validated by the user under real service conditions.