Rogers FPC BISCO Silicone
Rogers FPC BISCO Silicone — supplied to your specified Rogers grade and converted into pads, strips and custom shapes. Each lot is traceable and conversion-ready on our qualified lines.
- BISCO Silicone
- Supplied to Rogers grade FPC
- Die-cut, slit or laminated to drawing
- Lot-traceable, QC matched to spec
At a glance
- Brand
- Rogers
- Grade
- FPC
- Family
- BISCO solid and specialty silicone
- Nominal build
- 0.25 – 6.4 mm
- Our role
- Supply & precision conversion
Product overview
Rogers FPC covers the solid and specialty silicone constructions in the BISCO range. Solid sheet is chosen where a foam would be crushed or where the seal must resist pressure rather than simply fill a gap, and the specialty grades add properties such as flame blocking, electrical performance or reinforcement for demanding sealing duty.
DINGGU Tape supplies this grade as original manufacturer material and converts it on our own slitting, die-cutting and lamination lines. You can order it in roll form, or as finished parts made to your drawing — pads, strips, gaskets and multi-layer builds — with lot-level traceability on every delivery.
Construction and materials
Technical data
The values below are typical reference ranges for the BISCO solid and specialty silicone family, provided to help you shortlist a construction. They are not reproduced from a manufacturer datasheet and are not a specification. Before release to production, confirm the figures for Rogers FPC against the current technical datasheet issued by Rogers.
| Material | Solid silicone rubber and specialty reinforced constructions |
|---|---|
| Hardness range | approx. 30 – 70 Shore A across the family (typical) |
| Service temperature | −55 °C … +200 °C continuous (typical) |
| Short-term peak | up to +260 °C (typical, grade-dependent) |
| Thickness range | 0.25 – 6.4 mm across the family |
| Ageing resistance | Excellent UV, ozone and heat-ageing resistance |
| Flammability | Flame-block and UL-rated grades available within the range |
| Compression behaviour | Solid section resists pressure without collapsing |
| Adhesive option | Available plain or PSA-laminated |
| Specialty variants | Reinforced, electrically functional and fire-barrier constructions by grade |
Typical applications
- Pressure-bearing seals and diaphragms in process equipment
- Fire-barrier and flame-block layers in transport interiors
- High-temperature insulating pads and washers
- Sealing faces that must resist media pressure rather than fill a gap
- Specialty electrical and thermal interface components
Application guidance
- Select hardness by whether the joint needs conformity or pressure resistance
- Solid silicone needs higher closure force than foam — check the fastener plan
- Confirm media compatibility for the specific fluid or gas in service
- Specify PSA only where service temperature suits the adhesive, not just the silicone
- Die-cut or water-jet complex profiles rather than hand-cutting
Supply and conversion
| Supplied as | Original manufacturer material, converted to your drawing or sample |
|---|---|
| Conversion formats | Sheets, slit rolls, die-cut gaskets and frames, kiss-cut parts, PSA-laminated stock |
| Processes in house | Precision slitting, rotary and flatbed die-cutting, laser cutting, lamination |
| Dimensional tolerance | Typically ±0.15 mm on die-cut parts and ±0.5 mm on slit width, part-dependent |
| Multi-layer builds | Laminated stacks combining foam, film, liner and secondary adhesives |
| Liner engineering | Split liners, extended tabs, kiss-cut liners and custom release weights |
| Lot control | Lot-level traceability from incoming reel to finished part |
| Inspection | First-article inspection and dimensional report available on request |
| Minimum order | Sample and pilot quantities accepted for qualification builds |
| Documentation | Manufacturer datasheet and, where issued, RoHS / REACH statements forwarded with delivery |
Important notice
Trademarks. PORON®, BISCO® and R/bak® are trademarks of Rogers Corporation. DINGGU Tape is an independent converter and supply partner. We are not affiliated with, authorised, sponsored or endorsed by this manufacturer, and grade references are used solely to identify the material a customer has specified.
Illustrations. All drawings on this page are original schematic artwork produced by DINGGU Tape to show a generic construction. They are not manufacturer photography, not to scale, and do not depict the exact appearance of the finished product.
Technical values. Figures are indicative family-level ranges for orientation only and carry no warranty. The manufacturer’s current datasheet is the sole authority for Rogers FPC. Suitability for a specific application must be validated by the user under real service conditions.