tesa ACXplus 76754
tesa 76754 — supplied to your specified tesa part number and converted into pads, strips and custom shapes. Each lot is traceable and conversion-ready on our qualified lines.
- ACXplus High-Performance Bonding Tape
- Supplied to tesa part No. 76754
- Die-cut, slit or laminated to drawing
- Lot-traceable, QC matched to spec
At a glance
- Brand
- tesa
- Grade
- 76754
- Family
- ACXplus high-performance bonding tape
- Nominal build
- 0.5 – 3.0 mm
- Our role
- Supply & precision conversion
Product overview
tesa 76754 is a viscoelastic acrylic foam bonding tape designed to replace screws, rivets and welding in visible assemblies. The homogeneous acrylic core behaves viscoelastically, so it relaxes stress caused by differential thermal expansion while still transferring structural load, and it seals the joint against water and dust in the same operation.
DINGGU Tape supplies this grade as original manufacturer material and converts it on our own slitting, die-cutting and lamination lines. You can order it in roll form, or as finished parts made to your drawing — pads, strips, gaskets and multi-layer builds — with lot-level traceability on every delivery.
Construction and materials
Technical data
The values below are typical reference ranges for the ACXplus high-performance bonding tape family, provided to help you shortlist a construction. They are not reproduced from a manufacturer datasheet and are not a specification. Before release to production, confirm the figures for tesa 76754 against the current technical datasheet issued by tesa.
| Construction | Homogeneous viscoelastic acrylic foam core, adhesive both faces |
|---|---|
| Adhesive system | Pure acrylic pressure-sensitive; general-purpose and high-tack classes |
| Carrier | Acrylic foam core — no film carrier |
| Colour family | Grey · black · transparent (grade-dependent) |
| Thickness range | 0.5 – 3.0 mm across the family |
| Service temperature | −40 °C … +100 °C continuous (typical) |
| Short-term peak | up to +200 °C (typical, grade-dependent) |
| Substrate suitability | Aluminium, stainless, painted and powder-coated metal, glass, ABS/PC, composites |
| Strength build-up | Handling strength immediate; final strength after approx. 72 h |
| Stress relaxation | Viscoelastic core absorbs thermal movement between dissimilar materials |
Typical applications
- Façade, cladding and architectural panel bonding
- Transparent bonding of glass and acrylic where the joint is visible
- Stiffener and reinforcement bonding on thin sheet metal
- Sign, letter and light-box assembly
- Rail vehicle and caravan panel joining with sealing in one step
Application guidance
- Clean with an IPA / water mix and allow full flash-off before bonding
- Bond at room temperature; warm both parts if working in a cold workshop
- Apply high, even pressure over the full length of the bond line
- Design for shear or tensile loading rather than peel
- Use a transparent grade only against clean, unprinted glass for best optics
Supply and conversion
| Supplied as | Original manufacturer material, converted to your drawing or sample |
|---|---|
| Conversion formats | Logs, slit rolls, die-cut pads and strips, kiss-cut sheets, tabbed and finger-lift parts |
| Processes in house | Precision slitting, rotary and flatbed die-cutting, laser cutting, lamination |
| Dimensional tolerance | Typically ±0.15 mm on die-cut parts and ±0.5 mm on slit width, part-dependent |
| Multi-layer builds | Laminated stacks combining foam, film, liner and secondary adhesives |
| Liner engineering | Split liners, extended tabs, kiss-cut liners and custom release weights |
| Lot control | Lot-level traceability from incoming reel to finished part |
| Inspection | First-article inspection and dimensional report available on request |
| Minimum order | Sample and pilot quantities accepted for qualification builds |
| Documentation | Manufacturer datasheet and, where issued, RoHS / REACH statements forwarded with delivery |
Important notice
Trademarks. tesa®, ACXplus®, Softprint® and HAF® are trademarks of tesa SE. DINGGU Tape is an independent converter and supply partner. We are not affiliated with, authorised, sponsored or endorsed by this manufacturer, and grade references are used solely to identify the material a customer has specified.
Illustrations. All drawings on this page are original schematic artwork produced by DINGGU Tape to show a generic construction. They are not manufacturer photography, not to scale, and do not depict the exact appearance of the finished product.
Technical values. Figures are indicative family-level ranges for orientation only and carry no warranty. The manufacturer’s current datasheet is the sole authority for tesa 76754. Suitability for a specific application must be validated by the user under real service conditions.