tesa 4863
tesa 4863 — supplied to your specified tesa part number and converted into pads, strips and custom shapes. Each lot is traceable and conversion-ready on our qualified lines.
- Sleeve / Splicing / Industrial Tape
- Supplied to tesa part No. 4863
- Die-cut, slit or laminated to drawing
- Lot-traceable, QC matched to spec
At a glance
- Brand
- tesa
- Grade
- 4863
- Family
- sleeve, splicing and industrial tape
- Nominal build
- 0.05 – 0.35 mm
- Our role
- Supply & precision conversion
Product overview
tesa 4863 belongs to the tesa converting and industrial tape range — the single-sided and double-sided constructions used to run production lines rather than to build the end product. Typical roles are splicing one web to the next, holding sleeves and cores, masking during finishing, and bundling or protecting parts in transit.
DINGGU Tape supplies this grade as original manufacturer material and converts it on our own slitting, die-cutting and lamination lines. You can order it in roll form, or as finished parts made to your drawing — pads, strips, gaskets and multi-layer builds — with lot-level traceability on every delivery.
Construction and materials
Technical data
The values below are typical reference ranges for the sleeve, splicing and industrial tape family, provided to help you shortlist a construction. They are not reproduced from a manufacturer datasheet and are not a specification. Before release to production, confirm the figures for tesa 4863 against the current technical datasheet issued by tesa.
| Construction | Mixed family — single-sided and double-sided constructions |
|---|---|
| Adhesive system | Acrylic, natural rubber or synthetic rubber depending on grade |
| Carrier options | PVC, PET, PP film, paper, non-woven or cloth |
| Colour family | Wide range — colour is often used for line identification |
| Thickness range | 0.05 – 0.35 mm across the family |
| Service temperature | Grade-dependent — short-term process heat on splicing grades |
| Typical function | Splicing, core starting, sleeve holding, masking, bundling, protection |
| Removal behaviour | Removable and permanent variants within the family |
| Substrate suitability | Paper and film webs, cores, sleeves, metal, painted surfaces |
| Converting note | Commonly supplied slit to narrow widths on long-length rolls |
Typical applications
- Flying and butt splicing of paper, film and foil webs
- Core starting and roll closing in converting plants
- Sleeve and blanket holding on printing cylinders
- Masking and protection during painting or finishing
- Bundling, strapping and transit protection of finished parts
Application guidance
- Match adhesive chemistry to the web — rubber for fast grab, acrylic for ageing
- For splices, ensure the tape spans the full web width and lies flat
- Use removable grades where residue on the substrate is unacceptable
- Check process temperature on the splice path before selecting a grade
- Order slit widths to match your web so no trimming is needed on line
Supply and conversion
| Supplied as | Original manufacturer material, converted to your drawing or sample |
|---|---|
| Conversion formats | Logs, slit rolls, die-cut pads and strips, kiss-cut sheets, tabbed and finger-lift parts |
| Processes in house | Precision slitting, rotary and flatbed die-cutting, laser cutting, lamination |
| Dimensional tolerance | Typically ±0.15 mm on die-cut parts and ±0.5 mm on slit width, part-dependent |
| Multi-layer builds | Laminated stacks combining foam, film, liner and secondary adhesives |
| Liner engineering | Split liners, extended tabs, kiss-cut liners and custom release weights |
| Lot control | Lot-level traceability from incoming reel to finished part |
| Inspection | First-article inspection and dimensional report available on request |
| Minimum order | Sample and pilot quantities accepted for qualification builds |
| Documentation | Manufacturer datasheet and, where issued, RoHS / REACH statements forwarded with delivery |
Important notice
Trademarks. tesa®, ACXplus®, Softprint® and HAF® are trademarks of tesa SE. DINGGU Tape is an independent converter and supply partner. We are not affiliated with, authorised, sponsored or endorsed by this manufacturer, and grade references are used solely to identify the material a customer has specified.
Illustrations. All drawings on this page are original schematic artwork produced by DINGGU Tape to show a generic construction. They are not manufacturer photography, not to scale, and do not depict the exact appearance of the finished product.
Technical values. Figures are indicative family-level ranges for orientation only and carry no warranty. The manufacturer’s current datasheet is the sole authority for tesa 4863. Suitability for a specific application must be validated by the user under real service conditions.