3M 926 Adhesive Transfer Tape
3M 926 Adhesive Transfer Tape — supplied to your specified 3M part number and converted into pads, strips and custom shapes. Each lot is traceable and conversion-ready on our qualified lines.
- Adhesive Transfer Tape
- Supplied to 3M part No. 926
- Die-cut, slit or laminated to drawing
- Lot-traceable, QC matched to spec
At a glance
- Brand
- 3M
- Grade
- 926
- Family
- adhesive transfer tape
- Nominal build
- 0.05 – 0.25 mm
- Our role
- Supply & precision conversion
Product overview
3M 926 is an unsupported adhesive transfer tape — a pure adhesive film carried on a release liner with no internal carrier at all. Because there is no film in the bond line the adhesive can flow into surface texture and follow contours, giving a very thin, near-invisible joint that transmits no carrier stiffness into the part.
DINGGU Tape supplies this grade as original manufacturer material and converts it on our own slitting, die-cutting and lamination lines. You can order it in roll form, or as finished parts made to your drawing — pads, strips, gaskets and multi-layer builds — with lot-level traceability on every delivery.
Construction and materials
Technical data
The values below are typical reference ranges for the adhesive transfer tape family, provided to help you shortlist a construction. They are not reproduced from a manufacturer datasheet and are not a specification. Before release to production, confirm the figures for 3M 926 against the current technical datasheet issued by 3M.
| Construction | Unsupported adhesive film on release liner — 100 % adhesive, no carrier |
|---|---|
| Adhesive system | Pressure-sensitive acrylic; high-performance and LSE classes available |
| Carrier | None — adhesive transfers off the liner onto the part |
| Colour family | Clear / translucent |
| Thickness range | 0.05 – 0.25 mm across the family |
| Service temperature | −40 °C … +120 °C continuous (typical) |
| Short-term peak | up to +200 °C (typical, grade-dependent) |
| Substrate suitability | Metal, glass, painted surfaces, foams, many plastics; LSE grades for PP/PE |
| Surface wetting | Excellent — flows into texture, ideal on rough or porous faces |
| Typical use | Laminating and pre-coating parts before die-cutting |
Typical applications
- Pre-coating sheets and parts with adhesive before die-cutting
- Laminating foam, felt, rubber and fabric to rigid substrates
- Graphic and decal mounting where no carrier line may be visible
- Bonding to textured, grained or slightly porous surfaces
- Thin gasket attachment where total build height is critical
Application guidance
- Laminate to the part first, then die-cut through part and adhesive together
- Use a roller or nip to avoid trapping air — unsupported films show bubbles readily
- Handle with the liner in place; the bare adhesive film is difficult to reposition
- Choose an LSE grade for polypropylene, polyethylene and powder coats
- Confirm liner release weight against your automated dispensing equipment
Supply and conversion
| Supplied as | Original manufacturer material, converted to your drawing or sample |
|---|---|
| Conversion formats | Logs, slit rolls, die-cut pads and strips, kiss-cut sheets, tabbed and finger-lift parts |
| Processes in house | Precision slitting, rotary and flatbed die-cutting, laser cutting, lamination |
| Dimensional tolerance | Typically ±0.15 mm on die-cut parts and ±0.5 mm on slit width, part-dependent |
| Multi-layer builds | Laminated stacks combining foam, film, liner and secondary adhesives |
| Liner engineering | Split liners, extended tabs, kiss-cut liners and custom release weights |
| Lot control | Lot-level traceability from incoming reel to finished part |
| Inspection | First-article inspection and dimensional report available on request |
| Minimum order | Sample and pilot quantities accepted for qualification builds |
| Documentation | Manufacturer datasheet and, where issued, RoHS / REACH statements forwarded with delivery |
Important notice
Trademarks. 3M™ and VHB™ are trademarks of 3M Company. DINGGU Tape is an independent converter and supply partner. We are not affiliated with, authorised, sponsored or endorsed by this manufacturer, and grade references are used solely to identify the material a customer has specified.
Illustrations. All drawings on this page are original schematic artwork produced by DINGGU Tape to show a generic construction. They are not manufacturer photography, not to scale, and do not depict the exact appearance of the finished product.
Technical values. Figures are indicative family-level ranges for orientation only and carry no warranty. The manufacturer’s current datasheet is the sole authority for 3M 926. Suitability for a specific application must be validated by the user under real service conditions.