01Our Role02Products
Double-Sided Bonding TapesAcrylic Foam Structural TapesThermal Interface MaterialsEMI / RFI ShieldingInsulation & High-Temperature FilmsDouble-Sided & Foam TapesSurface Protection & MaskingOptical & Display MaterialsSpecialty & Difficult Substrates3M Industrial & Specialty Tapestesa Adhesive TapesRogers BISCO & PORON Foams
03Die-Cutting
Rotary Die-CuttingFlatbed / Steel-RuleLaser Die-CuttingCNC Digital KnifeMulti-Layer Composite
04Converting
Precision SlittingRewinding & RespoolingLamination & CompositingSheeting & Cut-to-LengthLogo, Print & Private Label
05Industries
Consumer ElectronicsNew Energy & EV BatteryAutomotive Interior & ExteriorHome AppliancesDisplay & OpticalMedical & WearablesIndustrial & MachineryRenewable EnergySignage, Print & GraphicsRail & Transport
06Strength
Testing LaboratoryCertifications
07Our Story
MilestonesOur Principles
08FAQ
Ordering & MOQQuality & Testing
09Contact
Request a QuoteFind a Representative
Get a Quote

3M 9472LE Adhesive Transfer Tape

3M 9472LE Adhesive Transfer Tape — supplied to your specified 3M part number and converted into pads, strips and custom shapes. Each lot is traceable and conversion-ready on our qualified lines.

  • Adhesive Transfer Tape
  • Supplied to 3M part No. 9472LE
  • Die-cut, slit or laminated to drawing
  • Lot-traceable, QC matched to spec
9472LETRANSFER TAPEDINGGU schematic illustration
Original DINGGU schematic illustration of a adhesive transfer tape — representative of the construction, not manufacturer photography.

At a glance

Brand
3M
Grade
9472LE
Family
adhesive transfer tape
Nominal build
0.05 – 0.25 mm
Our role
Supply & precision conversion
Request a quote for 3M 9472LE

Product overview

3M 9472LE is an unsupported adhesive transfer tape — a pure adhesive film carried on a release liner with no internal carrier at all. Because there is no film in the bond line the adhesive can flow into surface texture and follow contours, giving a very thin, near-invisible joint that transmits no carrier stiffness into the part.

DINGGU Tape supplies this grade as original manufacturer material and converts it on our own slitting, die-cutting and lamination lines. You can order it in roll form, or as finished parts made to your drawing — pads, strips, gaskets and multi-layer builds — with lot-level traceability on every delivery.

Construction and materials

Release linerUnsupported acrylic adhesive (100 % adhesive)0.05 – 0.25 mmCONSTRUCTION — 9472LELayer order shown to scale of nominal build. Original DINGGU schematic — not a manufacturer drawing.
Layer sequence of the adhesive transfer tape construction. Drawn by DINGGU Tape for engineering orientation.

Technical data

The values below are typical reference ranges for the adhesive transfer tape family, provided to help you shortlist a construction. They are not reproduced from a manufacturer datasheet and are not a specification. Before release to production, confirm the figures for 3M 9472LE against the current technical datasheet issued by 3M.

3M 9472LE — typical family reference data
ConstructionUnsupported adhesive film on release liner — 100 % adhesive, no carrier
Adhesive systemPressure-sensitive acrylic; high-performance and LSE classes available
CarrierNone — adhesive transfers off the liner onto the part
Colour familyClear / translucent
Thickness range0.05 – 0.25 mm across the family
Service temperature−40 °C … +120 °C continuous (typical)
Short-term peakup to +200 °C (typical, grade-dependent)
Substrate suitabilityMetal, glass, painted surfaces, foams, many plastics; LSE grades for PP/PE
Surface wettingExcellent — flows into texture, ideal on rough or porous faces
Typical useLaminating and pre-coating parts before die-cutting

Typical applications

  • Pre-coating sheets and parts with adhesive before die-cutting
  • Laminating foam, felt, rubber and fabric to rigid substrates
  • Graphic and decal mounting where no carrier line may be visible
  • Bonding to textured, grained or slightly porous surfaces
  • Thin gasket attachment where total build height is critical

Application guidance

  • Laminate to the part first, then die-cut through part and adhesive together
  • Use a roller or nip to avoid trapping air — unsupported films show bubbles readily
  • Handle with the liner in place; the bare adhesive film is difficult to reposition
  • Choose an LSE grade for polypropylene, polyethylene and powder coats
  • Confirm liner release weight against your automated dispensing equipment

Supply and conversion

How we supply 3M 9472LE
Supplied asOriginal manufacturer material, converted to your drawing or sample
Conversion formatsLogs, slit rolls, die-cut pads and strips, kiss-cut sheets, tabbed and finger-lift parts
Processes in housePrecision slitting, rotary and flatbed die-cutting, laser cutting, lamination
Dimensional toleranceTypically ±0.15 mm on die-cut parts and ±0.5 mm on slit width, part-dependent
Multi-layer buildsLaminated stacks combining foam, film, liner and secondary adhesives
Liner engineeringSplit liners, extended tabs, kiss-cut liners and custom release weights
Lot controlLot-level traceability from incoming reel to finished part
InspectionFirst-article inspection and dimensional report available on request
Minimum orderSample and pilot quantities accepted for qualification builds
DocumentationManufacturer datasheet and, where issued, RoHS / REACH statements forwarded with delivery

Important notice

Trademarks. 3M™ and VHB™ are trademarks of 3M Company. DINGGU Tape is an independent converter and supply partner. We are not affiliated with, authorised, sponsored or endorsed by this manufacturer, and grade references are used solely to identify the material a customer has specified.

Illustrations. All drawings on this page are original schematic artwork produced by DINGGU Tape to show a generic construction. They are not manufacturer photography, not to scale, and do not depict the exact appearance of the finished product.

Technical values. Figures are indicative family-level ranges for orientation only and carry no warranty. The manufacturer’s current datasheet is the sole authority for 3M 9472LE. Suitability for a specific application must be validated by the user under real service conditions.