Rogers 4790-92-30 PORON Urethane Foam
Rogers 4790-92-30 PORON Urethane Foam — supplied to your specified Rogers grade and converted into pads, strips and custom shapes. Each lot is traceable and conversion-ready on our qualified lines.
- PORON Urethane Foam
- Supplied to Rogers grade 4790-92-30
- Die-cut, slit or laminated to drawing
- Lot-traceable, QC matched to spec
At a glance
- Brand
- Rogers
- Grade
- 4790-92-30
- Family
- PORON industrial polyurethane foam
- Nominal build
- 0.25 – 12.7 mm
- Our role
- Supply & precision conversion
Product overview
Rogers 4790-92-30 is an open-cell microcellular polyurethane foam used where a gasket must stay resilient for the life of the product. Unlike conventional blown foams it recovers almost fully after long-term compression, so a seal made from it keeps pushing back against the mating face instead of taking a permanent set and leaking.
DINGGU Tape supplies this grade as original manufacturer material and converts it on our own slitting, die-cutting and lamination lines. You can order it in roll form, or as finished parts made to your drawing — pads, strips, gaskets and multi-layer builds — with lot-level traceability on every delivery.
Construction and materials
Technical data
The values below are typical reference ranges for the PORON industrial polyurethane foam family, provided to help you shortlist a construction. They are not reproduced from a manufacturer datasheet and are not a specification. Before release to production, confirm the figures for Rogers 4790-92-30 against the current technical datasheet issued by Rogers.
| Material | Open-cell microcellular polyurethane foam |
|---|---|
| Cell structure | Fine, uniform open cell — non-fibrous |
| Grade coding | Numeric suffix denotes the density / compression-force-deflection class in the series |
| Density range | approx. 240 – 640 kg/m³ across the family (typical) |
| Compression set | Very low — recovers after prolonged compression |
| Service temperature | −40 °C … +90 °C continuous (typical) |
| Thickness range | 0.25 – 12.7 mm across the family |
| Flammability | UL 94 rated grades available within the range (e.g. V-0 class) |
| Adhesive option | Available plain or PSA-laminated one or both sides |
| Sealing behaviour | Seals at low closure force — suited to thin plastic housings |
Typical applications
- Enclosure and housing gasketing at low closure force
- Display and lens cushioning in consumer electronics
- Battery-pack cell cushioning and swell management
- NVH pads and squeak/rattle isolation in vehicle interiors
- Compression seals around switches, buttons and connectors
Application guidance
- Design for a target compression of roughly 25–50 % for a reliable seal
- Avoid over-compression — it raises closure force without improving sealing
- Allow for the PSA thickness in the stack-up when calculating gap
- Specify skin or skinless faces depending on whether wicking matters
- Die-cut gaskets rather than splicing strips where a continuous seal is required
Supply and conversion
| Supplied as | Original manufacturer material, converted to your drawing or sample |
|---|---|
| Conversion formats | Sheets, slit rolls, die-cut gaskets and frames, kiss-cut parts, PSA-laminated stock |
| Processes in house | Precision slitting, rotary and flatbed die-cutting, laser cutting, lamination |
| Dimensional tolerance | Typically ±0.15 mm on die-cut parts and ±0.5 mm on slit width, part-dependent |
| Multi-layer builds | Laminated stacks combining foam, film, liner and secondary adhesives |
| Liner engineering | Split liners, extended tabs, kiss-cut liners and custom release weights |
| Lot control | Lot-level traceability from incoming reel to finished part |
| Inspection | First-article inspection and dimensional report available on request |
| Minimum order | Sample and pilot quantities accepted for qualification builds |
| Documentation | Manufacturer datasheet and, where issued, RoHS / REACH statements forwarded with delivery |
Important notice
Trademarks. PORON®, BISCO® and R/bak® are trademarks of Rogers Corporation. DINGGU Tape is an independent converter and supply partner. We are not affiliated with, authorised, sponsored or endorsed by this manufacturer, and grade references are used solely to identify the material a customer has specified.
Illustrations. All drawings on this page are original schematic artwork produced by DINGGU Tape to show a generic construction. They are not manufacturer photography, not to scale, and do not depict the exact appearance of the finished product.
Technical values. Figures are indicative family-level ranges for orientation only and carry no warranty. The manufacturer’s current datasheet is the sole authority for Rogers 4790-92-30. Suitability for a specific application must be validated by the user under real service conditions.