Rogers R/bak 2010 Plate Mounting Tape
Rogers R/bak 2010 Plate Mounting Tape — supplied to your specified Rogers grade and converted into pads, strips and custom shapes. Each lot is traceable and conversion-ready on our qualified lines.
- Plate Mounting Tape
- Supplied to Rogers grade R/bak 2010
- Die-cut, slit or laminated to drawing
- Lot-traceable, QC matched to spec
At a glance
- Brand
- Rogers
- Grade
- R/bak 2010
- Family
- R/bak plate-mounting tape
- Nominal build
- 0.38 – 0.50 mm
- Our role
- Supply & precision conversion
Product overview
Rogers R/bak 2010 is a compressible plate-mounting tape for flexographic printing. The cushion layer sits between the printing plate and the cylinder and absorbs impression pressure, which stabilises the plate at the print nip. The result is reduced dot gain and bar marking, cleaner solids and measurably longer plate life.
DINGGU Tape supplies this grade as original manufacturer material and converts it on our own slitting, die-cutting and lamination lines. You can order it in roll form, or as finished parts made to your drawing — pads, strips, gaskets and multi-layer builds — with lot-level traceability on every delivery.
Construction and materials
Technical data
The values below are typical reference ranges for the R/bak plate-mounting tape family, provided to help you shortlist a construction. They are not reproduced from a manufacturer datasheet and are not a specification. Before release to production, confirm the figures for Rogers R/bak 2010 against the current technical datasheet issued by Rogers.
| Construction | Compressible foam cushion, adhesive on both faces |
|---|---|
| Adhesive system | Differential — plate side and cylinder side specified separately |
| Cushion classes | Soft, medium and firm cushions across the family |
| Thickness range | 0.38 – 0.50 mm across the family |
| Grade coding | Series number indicates cushion and adhesive combination |
| Service conditions | Press-room ambient — not intended for elevated temperature |
| Print benefit | Lower dot gain, reduced halo and bar marking, longer plate life |
| Demounting | Engineered for clean plate removal without foam splitting |
| Substrate suitability | Photopolymer plates on steel or aluminium cylinders and sleeves |
| Selection driver | Match cushion to artwork — line, solid or combination work |
Typical applications
- Flexographic plate mounting for label and packaging print
- Corrugated post-print with heavy solid ink coverage
- Fine-screen process work where dot gain must be controlled
- Sleeve-based print systems requiring repeatable mounting
- Repeat jobs where plates are demounted and re-used
Application guidance
- Degrease the cylinder or sleeve before mounting
- Lay the tape relaxed — do not stretch it onto the cylinder
- Butt rather than overlap joints to avoid a raised print line
- Roll or machine-mount to expel trapped air across the full width
- Choose softer cushions for solids, firmer cushions for fine line and text
Supply and conversion
| Supplied as | Original manufacturer material, converted to your drawing or sample |
|---|---|
| Conversion formats | Logs, slit rolls, die-cut pads and strips, kiss-cut sheets, tabbed and finger-lift parts |
| Processes in house | Precision slitting, rotary and flatbed die-cutting, laser cutting, lamination |
| Dimensional tolerance | Typically ±0.15 mm on die-cut parts and ±0.5 mm on slit width, part-dependent |
| Multi-layer builds | Laminated stacks combining foam, film, liner and secondary adhesives |
| Liner engineering | Split liners, extended tabs, kiss-cut liners and custom release weights |
| Lot control | Lot-level traceability from incoming reel to finished part |
| Inspection | First-article inspection and dimensional report available on request |
| Minimum order | Sample and pilot quantities accepted for qualification builds |
| Documentation | Manufacturer datasheet and, where issued, RoHS / REACH statements forwarded with delivery |
Important notice
Trademarks. PORON®, BISCO® and R/bak® are trademarks of Rogers Corporation. DINGGU Tape is an independent converter and supply partner. We are not affiliated with, authorised, sponsored or endorsed by this manufacturer, and grade references are used solely to identify the material a customer has specified.
Illustrations. All drawings on this page are original schematic artwork produced by DINGGU Tape to show a generic construction. They are not manufacturer photography, not to scale, and do not depict the exact appearance of the finished product.
Technical values. Figures are indicative family-level ranges for orientation only and carry no warranty. The manufacturer’s current datasheet is the sole authority for Rogers R/bak 2010. Suitability for a specific application must be validated by the user under real service conditions.