01Our Role02Products
Double-Sided Bonding TapesAcrylic Foam Structural TapesThermal Interface MaterialsEMI / RFI ShieldingInsulation & High-Temperature FilmsDouble-Sided & Foam TapesSurface Protection & MaskingOptical & Display MaterialsSpecialty & Difficult Substrates3M Industrial & Specialty Tapestesa Adhesive TapesRogers BISCO & PORON Foams
03Die-Cutting
Rotary Die-CuttingFlatbed / Steel-RuleLaser Die-CuttingCNC Digital KnifeMulti-Layer Composite
04Converting
Precision SlittingRewinding & RespoolingLamination & CompositingSheeting & Cut-to-LengthLogo, Print & Private Label
05Industries
Consumer ElectronicsNew Energy & EV BatteryAutomotive Interior & ExteriorHome AppliancesDisplay & OpticalMedical & WearablesIndustrial & MachineryRenewable EnergySignage, Print & GraphicsRail & Transport
06Strength
Testing LaboratoryCertifications
07Our Story
MilestonesOur Principles
08FAQ
Ordering & MOQQuality & Testing
09Contact
Request a QuoteFind a Representative
Get a Quote

Rogers R/bak 3020 Plate Mounting Tape

Rogers R/bak 3020 Plate Mounting Tape — supplied to your specified Rogers grade and converted into pads, strips and custom shapes. Each lot is traceable and conversion-ready on our qualified lines.

  • Plate Mounting Tape
  • Supplied to Rogers grade R/bak 3020
  • Die-cut, slit or laminated to drawing
  • Lot-traceable, QC matched to spec
R/bak 3020PLATE MOUNTING TAPEDINGGU schematic illustration
Original DINGGU schematic illustration of a R/bak plate-mounting tape — representative of the construction, not manufacturer photography.

At a glance

Brand
Rogers
Grade
R/bak 3020
Family
R/bak plate-mounting tape
Nominal build
0.38 – 0.50 mm
Our role
Supply & precision conversion
Request a quote for Rogers R/bak 3020

Product overview

Rogers R/bak 3020 is a compressible plate-mounting tape for flexographic printing. The cushion layer sits between the printing plate and the cylinder and absorbs impression pressure, which stabilises the plate at the print nip. The result is reduced dot gain and bar marking, cleaner solids and measurably longer plate life.

DINGGU Tape supplies this grade as original manufacturer material and converts it on our own slitting, die-cutting and lamination lines. You can order it in roll form, or as finished parts made to your drawing — pads, strips, gaskets and multi-layer builds — with lot-level traceability on every delivery.

Construction and materials

Release linerPlate-side adhesiveCompressible foam cushionCylinder-side adhesive0.38 – 0.50 mmCONSTRUCTION — R/bak 3020Layer order shown to scale of nominal build. Original DINGGU schematic — not a manufacturer drawing.
Layer sequence of the R/bak plate-mounting tape construction. Drawn by DINGGU Tape for engineering orientation.

Technical data

The values below are typical reference ranges for the R/bak plate-mounting tape family, provided to help you shortlist a construction. They are not reproduced from a manufacturer datasheet and are not a specification. Before release to production, confirm the figures for Rogers R/bak 3020 against the current technical datasheet issued by Rogers.

Rogers R/bak 3020 — typical family reference data
ConstructionCompressible foam cushion, adhesive on both faces
Adhesive systemDifferential — plate side and cylinder side specified separately
Cushion classesSoft, medium and firm cushions across the family
Thickness range0.38 – 0.50 mm across the family
Grade codingSeries number indicates cushion and adhesive combination
Service conditionsPress-room ambient — not intended for elevated temperature
Print benefitLower dot gain, reduced halo and bar marking, longer plate life
DemountingEngineered for clean plate removal without foam splitting
Substrate suitabilityPhotopolymer plates on steel or aluminium cylinders and sleeves
Selection driverMatch cushion to artwork — line, solid or combination work

Typical applications

  • Flexographic plate mounting for label and packaging print
  • Corrugated post-print with heavy solid ink coverage
  • Fine-screen process work where dot gain must be controlled
  • Sleeve-based print systems requiring repeatable mounting
  • Repeat jobs where plates are demounted and re-used

Application guidance

  • Degrease the cylinder or sleeve before mounting
  • Lay the tape relaxed — do not stretch it onto the cylinder
  • Butt rather than overlap joints to avoid a raised print line
  • Roll or machine-mount to expel trapped air across the full width
  • Choose softer cushions for solids, firmer cushions for fine line and text

Supply and conversion

How we supply Rogers R/bak 3020
Supplied asOriginal manufacturer material, converted to your drawing or sample
Conversion formatsLogs, slit rolls, die-cut pads and strips, kiss-cut sheets, tabbed and finger-lift parts
Processes in housePrecision slitting, rotary and flatbed die-cutting, laser cutting, lamination
Dimensional toleranceTypically ±0.15 mm on die-cut parts and ±0.5 mm on slit width, part-dependent
Multi-layer buildsLaminated stacks combining foam, film, liner and secondary adhesives
Liner engineeringSplit liners, extended tabs, kiss-cut liners and custom release weights
Lot controlLot-level traceability from incoming reel to finished part
InspectionFirst-article inspection and dimensional report available on request
Minimum orderSample and pilot quantities accepted for qualification builds
DocumentationManufacturer datasheet and, where issued, RoHS / REACH statements forwarded with delivery

Important notice

Trademarks. PORON®, BISCO® and R/bak® are trademarks of Rogers Corporation. DINGGU Tape is an independent converter and supply partner. We are not affiliated with, authorised, sponsored or endorsed by this manufacturer, and grade references are used solely to identify the material a customer has specified.

Illustrations. All drawings on this page are original schematic artwork produced by DINGGU Tape to show a generic construction. They are not manufacturer photography, not to scale, and do not depict the exact appearance of the finished product.

Technical values. Figures are indicative family-level ranges for orientation only and carry no warranty. The manufacturer’s current datasheet is the sole authority for Rogers R/bak 3020. Suitability for a specific application must be validated by the user under real service conditions.