tesa 6038
tesa 6038 — supplied to your specified tesa part number and converted into pads, strips and custom shapes. Each lot is traceable and conversion-ready on our qualified lines.
- Mounting & Bonding Tape
- Supplied to tesa part No. 6038
- Die-cut, slit or laminated to drawing
- Lot-traceable, QC matched to spec
At a glance
- Brand
- tesa
- Grade
- 6038
- Family
- mounting and bonding tape
- Nominal build
- 0.10 – 1.10 mm
- Our role
- Supply & precision conversion
Product overview
tesa 6038 is a double-sided mounting and bonding tape from the tesa 6000–7000 range. These constructions cover the middle ground between thin film tapes and structural acrylic foams: enough foam or film carrier to bridge minor surface irregularity and damp small movements, in a build height low enough for interior fit-out and appliance assembly.
DINGGU Tape supplies this grade as original manufacturer material and converts it on our own slitting, die-cutting and lamination lines. You can order it in roll form, or as finished parts made to your drawing — pads, strips, gaskets and multi-layer builds — with lot-level traceability on every delivery.
Construction and materials
Technical data
The values below are typical reference ranges for the mounting and bonding tape family, provided to help you shortlist a construction. They are not reproduced from a manufacturer datasheet and are not a specification. Before release to production, confirm the figures for tesa 6038 against the current technical datasheet issued by tesa.
| Construction | PE foam or PET film carrier, adhesive on both faces |
|---|---|
| Adhesive system | Acrylic or modified acrylic pressure-sensitive |
| Carrier options | Closed-cell PE foam for gap filling, PET film for thin high-strength bonds |
| Colour family | White · grey · black · transparent (grade-dependent) |
| Thickness range | 0.10 – 1.10 mm across the family |
| Service temperature | −30 °C … +100 °C continuous (typical) |
| Gap tolerance | Foam carriers accommodate minor unevenness and light curvature |
| Substrate suitability | Painted metal, glass, rigid plastics, coated board, laminates |
| Removability | Permanent and removable classes both exist within the range |
| Converting note | Readily die-cut into pads, strips, frames and gaskets |
Typical applications
- Interior fit-out: mirrors, panels, skirting and profile mounting
- Appliance and white-goods trim and badge attachment
- Signage and display construction
- Gasket and seal mounting on light enclosures
- Point-of-sale assembly with clean, fastener-free surfaces
Application guidance
- Wipe both surfaces with IPA and confirm they are dry before bonding
- Press the full bond area — corner-only pressure leaves unwetted adhesive
- Let the bond dwell 24 h before applying full service load
- Choose a foam carrier when either surface is textured or slightly curved
- For heavy or safety-relevant loads step up to a structural acrylic foam grade
Supply and conversion
| Supplied as | Original manufacturer material, converted to your drawing or sample |
|---|---|
| Conversion formats | Logs, slit rolls, die-cut pads and strips, kiss-cut sheets, tabbed and finger-lift parts |
| Processes in house | Precision slitting, rotary and flatbed die-cutting, laser cutting, lamination |
| Dimensional tolerance | Typically ±0.15 mm on die-cut parts and ±0.5 mm on slit width, part-dependent |
| Multi-layer builds | Laminated stacks combining foam, film, liner and secondary adhesives |
| Liner engineering | Split liners, extended tabs, kiss-cut liners and custom release weights |
| Lot control | Lot-level traceability from incoming reel to finished part |
| Inspection | First-article inspection and dimensional report available on request |
| Minimum order | Sample and pilot quantities accepted for qualification builds |
| Documentation | Manufacturer datasheet and, where issued, RoHS / REACH statements forwarded with delivery |
Important notice
Trademarks. tesa®, ACXplus®, Softprint® and HAF® are trademarks of tesa SE. DINGGU Tape is an independent converter and supply partner. We are not affiliated with, authorised, sponsored or endorsed by this manufacturer, and grade references are used solely to identify the material a customer has specified.
Illustrations. All drawings on this page are original schematic artwork produced by DINGGU Tape to show a generic construction. They are not manufacturer photography, not to scale, and do not depict the exact appearance of the finished product.
Technical values. Figures are indicative family-level ranges for orientation only and carry no warranty. The manufacturer’s current datasheet is the sole authority for tesa 6038. Suitability for a specific application must be validated by the user under real service conditions.