tesa 72028
tesa 72028 — supplied to your specified tesa part number and converted into pads, strips and custom shapes. Each lot is traceable and conversion-ready on our qualified lines.
- Softprint Double-Sided Tape
- Supplied to tesa part No. 72028
- Die-cut, slit or laminated to drawing
- Lot-traceable, QC matched to spec
At a glance
- Brand
- tesa
- Grade
- 72028
- Family
- Softprint plate-mounting tape
- Nominal build
- 0.38 – 1.90 mm
- Our role
- Supply & precision conversion
Product overview
tesa 72028 is a compressible double-sided foam tape for mounting flexographic printing plates. The foam layer acts as a controlled cushion between plate and cylinder: it absorbs impression pressure, prevents the plate from bouncing at the print nip and so reduces dot gain, halo and bar marking while extending plate life.
DINGGU Tape supplies this grade as original manufacturer material and converts it on our own slitting, die-cutting and lamination lines. You can order it in roll form, or as finished parts made to your drawing — pads, strips, gaskets and multi-layer builds — with lot-level traceability on every delivery.
Construction and materials
Technical data
The values below are typical reference ranges for the Softprint plate-mounting tape family, provided to help you shortlist a construction. They are not reproduced from a manufacturer datasheet and are not a specification. Before release to production, confirm the figures for tesa 72028 against the current technical datasheet issued by tesa.
| Construction | Compressible PE foam carrier, adhesive on both faces |
|---|---|
| Adhesive system | Differential — plate side and cylinder side tuned separately |
| Carrier | Closed-cell polyethylene foam cushion |
| Hardness classes | Soft / medium / hard cushion depending on grade |
| Thickness range | 0.38 – 1.90 mm across the family |
| Service temperature | +5 °C … +40 °C press-room conditions (typical) |
| Print benefit | Reduced dot gain, cleaner solids, less bar marking |
| Removability | Designed for clean plate demounting without foam split |
| Substrate suitability | Photopolymer plates, steel and aluminium print cylinders, sleeves |
| Selection driver | Choose cushion hardness by artwork type — line, solid or combination |
Typical applications
- Flexographic plate mounting on cylinders and sleeves
- Narrow-web label printing where dot fidelity is critical
- Corrugated post-print with heavy solid coverage
- Flexible packaging print with fine highlight dots
- Repeat-job plate remounting where clean demount matters
Application guidance
- Mount onto a clean, degreased cylinder or sleeve surface
- Avoid stretching the tape during application — lay it down relaxed
- Butt joints rather than overlap them to prevent a raised print line
- Use a mounting machine or roller to expel air along the whole width
- Select softer cushions for solids and harder cushions for fine line work
Supply and conversion
| Supplied as | Original manufacturer material, converted to your drawing or sample |
|---|---|
| Conversion formats | Logs, slit rolls, die-cut pads and strips, kiss-cut sheets, tabbed and finger-lift parts |
| Processes in house | Precision slitting, rotary and flatbed die-cutting, laser cutting, lamination |
| Dimensional tolerance | Typically ±0.15 mm on die-cut parts and ±0.5 mm on slit width, part-dependent |
| Multi-layer builds | Laminated stacks combining foam, film, liner and secondary adhesives |
| Liner engineering | Split liners, extended tabs, kiss-cut liners and custom release weights |
| Lot control | Lot-level traceability from incoming reel to finished part |
| Inspection | First-article inspection and dimensional report available on request |
| Minimum order | Sample and pilot quantities accepted for qualification builds |
| Documentation | Manufacturer datasheet and, where issued, RoHS / REACH statements forwarded with delivery |
Important notice
Trademarks. tesa®, ACXplus®, Softprint® and HAF® are trademarks of tesa SE. DINGGU Tape is an independent converter and supply partner. We are not affiliated with, authorised, sponsored or endorsed by this manufacturer, and grade references are used solely to identify the material a customer has specified.
Illustrations. All drawings on this page are original schematic artwork produced by DINGGU Tape to show a generic construction. They are not manufacturer photography, not to scale, and do not depict the exact appearance of the finished product.
Technical values. Figures are indicative family-level ranges for orientation only and carry no warranty. The manufacturer’s current datasheet is the sole authority for tesa 72028. Suitability for a specific application must be validated by the user under real service conditions.